C13H24O2
min. 97.5 %
C13H24O2
min. 97.5 %
iso-Decyl Acrylate F (IDA F)
iso-Decyl Acrylate F (IDA F) is an ester of Acrylic acid and is used as a raw material component in the synthesis of polymers. iso-Decyl Acrylate F (IDA F) is a monofunctional monomer with a characteristic high reactivity of acrylates and a long hydrophobic moiety. Copolymers of iso-Decyl Acrylate F (IDA F) can be prepared with (methacrylic acid and its salts, amides, and esters, and with (meth)acrylates, acrylonitrile, maleic acid esters, vinyl acetate, vinyl chloride, vinylidene chloride, styrene, butadiene, unsaturated polyesters, and drying oils, etc.
iso-Decyl Acrylate (IDA F) is a very useful feedstock for chemical syntheses because it readily undergoes addition reactions with a wide variety of organic and inorganic compounds.
Product Type: iso-Acrylate Monomer
Features & Benefits:
- Hydrophobicity
- Chemical resistance
- Low shrinkage
- Good wetting
- Impact strength
- Weatherability
- Low Tg
It is applied in the production of:
- Widely used in thermal and radcure coatings where it confers good impact strength and flexibility.
- Used in pressure-sensitive adhesives and repositionable labels and tapes.
- Used in inks and overprint varnishes.
Chemical Properties:
-
Puritymin. 97.5 %
-
Acid Valuemax. 0.02 %
-
Water contentmax. 0.2 %
-
Color APHAmax. 30
Physical Properties:
-
Appearanceclear, colorless
-
Physical formliquid
-
Molecular weight212.3 g/mol
-
Polymer Tg–55 °C
-
Tg–58 °C
-
Density0.885 g/cm3 at 20 °C
-
Boiling Point217 °C – 264 °C at 1,013 hPa
-
Flash point108 °C
-
Melting Point< – 100 °C
-
Viscosity6 mPa · s at 25 °C
-
Vapor Point0.03 hPa at 25 °C
In order to prevent polymerization, iso-Decyl Acrylate F (IDA F) must always be stored under air, and never under inert gases. The presence of oxygen is required for the stabilizer to function effectively. It has to contain a stabilizer and the storage temperature must not exceed 35 °C. Under these conditions, a storage stability of one year can be expected upon delivery. In order to minimize the likelihood of overstorage, the storage procedure should strictly follow the “first-in-first-out” principle. For extended storage periods over 4 weeks it is advisable to replenish the dissolved oxygen content. The preferred construction material for tanks and pipes is stainless steel. Carbon steel is also acceptable, although the formation of rust may be a problem with product quality (color). Iron(III)-ions have been shown to be a weak polymerization initiator. If carbon steel is to be used, special procedures should be used to prepare the tank for use. Storage tanks, pumps and pipes should be earthed.
Storage & Handling:
In order to prevent polymerization, iso-Decyl Acrylate F (IDA F) must always be stored under air, and never under inert gases. The presence of oxygen is required for the stabilizer to function effectively. It has to contain a stabilizer and the storage temperature must not exceed 35 °C. Under these conditions, a storage stability of one year can be expected upon delivery. In order to minimize the likelihood of overstorage, the storage procedure should strictly follow the “first-in-first-out” principle. For extended storage periods over 4 weeks it is advisable to replenish the dissolved oxygen content. The preferred construction material for tanks and pipes is stainless steel. Carbon steel is also acceptable, although the formation of rust may be a problem with product quality (color). Iron(III)-ions have been shown to be a weak polymerization initiator. If carbon steel is to be used, special procedures should be used to prepare the tank for use. Storage tanks, pumps and pipes should be earthed.
A Safety Data Sheet has been compiled for iso-Decyl Acrylate F (IDA F) that contains up-to-date information on questions relevant to safety.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect the processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.