Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000)

In order to prevent polymerization Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) must always be stored under air, and never under inert gases. The presence of oxygen is required for the stabilizer to function effectively. Freezing of Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) results in the segregation of monomer and inhibitor. In addition, it is especially important to replenish dissolved oxygen after melting the drummed material prior to use. Replenishment dissolved oxygen and mixing of MEHQ into the monomer can be done using a palette shaker or a drum tumbler. The melting process requires temperatures of 20 °C or higher but at a maximum of 35 °C as the heating temperature. Warming the product in a room of 20 – 25 °C over several days is the preferred option. As an alternative, if faster melting is required heating cabinets using hot water or hot oil are the preferred apparatus for the thawing process of Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) since this avoids hot spots. Local hot spots of more than 35 °C may result in premature aging of the material. Product temperatures of more than 45 °C may result in polymerization of the monomer. During storage as a molten liquid, it is advisable to replenish the dissolved oxygen content on a weekly basis. Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) has to contain a stabilizer and the storage temperature must not exceed 20 °C to prevent premature quality degradation. If the above-mentioned conditions are met a storage stability Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) of 6 months can be expected upon delivery.

A Safety Data Sheet has been compiled for Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) that contains up-to-date information on questions relevant to safety. Flash-point over 90 °C. Ignition temperature 446 °C. When working with MPEGMA 2000, the sanitary rules for organizing technological processes and hygienic requirements for production equipment must be observed. All types of work with Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) should be carried out in rooms equipped with general supply and exhaust ventilation. It is not allowed to carry out work in these rooms using an open fire. Those working with Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) must be provided with special clothing and personal protective equipment in accordance with GOST 12.4.034. In the event of a fire, it is necessary to use fire extinguishers OP-5, ORP-100 felt, sand, sand, asbestos cloth. Spilled on solid ground Methyl Polyethyleneglycol Methacrylate 2000 (MPEGMA 2000) should be covered with sand.

The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect the processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.