s-Lauryl Methacrylate (SLMA)

In order to prevent polymerization, s-Lauryl Methacrylate (SLMA) must always be stored under air, and never under inert gases. The presence of oxygen is required for the stabilizer to function effectively. It has to contain a stabilizer and the storage temperature must not exceed 35 °C. Under these conditions, the storage stability of one year can be expected upon delivery. In order to minimize the likelihood of overstorage, the storage procedure should strictly follow the “first-in-first-out” principle. The preferred construction material for tanks and pipes is stainless steel. Carbon steel is also acceptable, although the formation of rust may be a problem with product quality (color). Iron(III)-ions have been shown to be a weak polymerization initiator. If carbon steel is to be used, special procedures should be used to prepare the tank for use. Storage tanks, pumps, and pipes should be earthed.

A Safety Data Sheet has been compiled for s-Lauryl Methacrylate (SLMA) that contains up-to-date information on questions relevant to safety. Flash-point 110 °C. Ignition temperature 257 °C. When working with s-Lauryl Methacrylate (SLMA), the sanitary rules for organizing technological processes and hygienic requirements for production equipment must be strictly observed. All types of work with s-Lauryl Methacrylate (SLMA) should be carried out in rooms equipped with general supply and exhaust ventilation. It is not allowed to carry out work in these rooms using an open fire. Those working with s-Lauryl Methacrylate (SLMA) must be provided with special clothing and personal protective equipment in accordance with GOST 12.4.034. In the event of a fire, it is necessary to use fire extinguishers OP-5, OVP-100 felt, sand, asbestos cloth. s-Lauryl Methacrylate (SLMA) spilled onto solid ground should be covered with sand.

The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect the processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.