Chemical name C1218 METHACRYLATE F, (C1218MA F)
Chemical formula

C16H30O2
C18H34O2
C20H38O2
C22H42O2

Concentration

min. 97.0%

Inhibitor 100 ± 20 ppm MEHQ
CAS Number 142-90-5 (C12)
2549-53-3 (C14)
2495-27-4 (C16)
32360-05-7 (C18)
EINECS # 205-570-6 (C12)
219-835-9 (C14)
219-672-3 (C16)
251-013-5 (C18)
HS code 2916140000
Chemical name C1218 METHACRYLATE F, (C1218MA F)
HS code 2916140000
Chemical formula

C16H30O2
C18H34O2
C20H38O2
C22H42O2

Concentration

min. 97.0%

Inhibitor 100 ± 20 ppm MEHQ
CAS Number 142-90-5 (C12)
2549-53-3 (C14)
2495-27-4 (C16)
32360-05-7 (C18)
EINECS # 205-570-6 (C12)
219-835-9 (C14)
219-672-3 (C16)
251-013-5 (C18)

C1218 Methacrylate F (C1218MA F)

C1218 Methacrylate F (C1218MA F) is an ester of Acrylic acid and is used as a raw material component in the synthesis of polymers. C1218 Methacrylate F (C1218MA F) is a monofunctional monomer with a characteristic high reactivity of acrylates and a long hydrophobic alkyl radical in the alcohol part of the molecule. C1218 Methacrylate F (C1218MA F) forms (co)polymers with (meth)acrylic acid and its salts, amides, and esters, as well as with acrylonitrile, maleic esters, vinyl acetate, vinyl chloride, vinylidene chloride, styrene, butadiene, and with other monomers.

C1218 Methacrylate F (C1218MA F) is a very useful starting material for chemical syntheses because it readily undergoes addition reactions with a wide variety of organic and inorganic compounds.

Product Type: Acrylate Monomer

Features & Benefits:

  • Hydrophobicity
  • Water/Chemical resistance
  • Weather resistance
  • Low Shrinkage
  • Impact strength
  • Flexibility

Applications areas:

  • C1218 Methacrylate F (C1218MA F) is used in oil additives as a flow/viscosity index modifier for highly paraffinic oils and as a pour point depressant. C1218 Methacrylate F (C1218MA F) may also be useful in the production of coatings for concrete, paper, cardboard, and textile, as well as in the production of pressure-sensitive varnishes and adhesives. C1218 Methacrylate F (C1218MA F) may be included as a co-monomer in polymer for paint resins, hair-care compositions, and floor care products.

It is applied in the production of:

  • Coatings
  • Varnishes
  • Leather & Textile
  • Lubricants
  • Plastics
  • Oilfield
  • Adhesives & Sealants
  • Rad / UV Cure
1
1

Chemical Properties:

  • Purity
    min. 97%
  • Acid Value
    max. 0.05%
  • Water content
    max. 0.2%
  • Color APHA
    max. 100
1

Physical Properties:

  • Appearance
    Colorless to pale yellow
  • Physical form
    Liquid
  • Molecular weight
    254.4 (С12) / 282.5 (С14) / 310.5 (С16) / 338.6 (С18)
  • Density
    0.87 g/cm3 at 20 °C
  • Flash point
    110 °C
  • Melting Point
    < 0 °C
  • Viscosity
    6,6 mPAS · s at 23 °C

In order to prevent polymerization, C1218 Methacrylate F (C1218MA F) must always be stored under air, and never under inert gases. The presence of oxygen is required for the stabilizer to function effectively. It has to contain a stabilizer and the storage temperature must not exceed 35 °C. Under these conditions, the storage stability of one year can be expected upon delivery. In order to minimize the likelihood of over storage, the storage procedure should strictly follow the “first-in-first-out” principle. For extended storage periods over 4 weeks, it is advisable to replenish the dissolved oxygen content. If C1218MA F is crystallized the product should never be partially molten and taken because of the possible separation from the stabilizer. Ensure that there is no crystallized product in the container before use. Obtain information from supplier/manufacturer before dissolving totally or partially crystallized products. The ambient temperature of the container may not exceed the stated temperature limit when melting the product or keeping it at a moderate temperature. The preferred construction material for tanks and pipes is stainless steel. Carbon steel is also acceptable, although the formation of rust may be a problem with product quality (color). Iron(III)-ions have been shown to be a weak polymerization initiator. If carbon steel is to be used, special procedures should be used to prepare the tank for use. Storage tanks, pumps, and pipes should be earthed.

Storage & Handling:

In order to prevent polymerization, C1218 Methacrylate F (C1218MA F) must always be stored under air, and never under inert gases. The presence of oxygen is required for the stabilizer to function effectively. It has to contain a stabilizer and the storage temperature must not exceed 35 °C. Under these conditions, the storage stability of one year can be expected upon delivery. In order to minimize the likelihood of over storage, the storage procedure should strictly follow the “first-in-first-out” principle. For extended storage periods over 4 weeks, it is advisable to replenish the dissolved oxygen content. If C1218MA F is crystallized the product should never be partially molten and taken because of the possible separation from the stabilizer. Ensure that there is no crystallized product in the container before use. Obtain information from supplier/manufacturer before dissolving totally or partially crystallized products. The ambient temperature of the container may not exceed the stated temperature limit when melting the product or keeping it at a moderate temperature. The preferred construction material for tanks and pipes is stainless steel. Carbon steel is also acceptable, although the formation of rust may be a problem with product quality (color). Iron(III)-ions have been shown to be a weak polymerization initiator. If carbon steel is to be used, special procedures should be used to prepare the tank for use. Storage tanks, pumps, and pipes should be earthed.

Safety

A Safety Data Sheet has been compiled for C1218 Methacrylate F (C1218MA F) that contains up-to-date information on questions relevant to safety.

Note

The data presented here are based on current knowledge and experience. Given the many factors that can affect the processing and use of the product, these data do not free consumers from the need to conduct their own tests and samples. Also, these data do not imply a guarantee of any specific properties or suitability of the product for a particular application. Any descriptions, drawings, photographs, data, ratios, weights, etc. presented here. subject to change without prior notice and do not constitute the contractual quality of the product. The end-user of the product is required to comply with all property rights and existing laws, as well as legal standards.

It can be purchased in bulk or packed in drums or IBC and delivered to the final destination

Delivery conditions

It can be purchased in bulk or packed in drums or IBC and delivered to the final destination